Search By Application
 
DEKATI ELPI - Electrical Low Pressure Impactor
Model: ELPI-01
Price: From £61,270.00
Delivery: 6 - 8 WEEKS ARO

DEKATI ELPI - Electrical Low Pressure Impactor

Measures real-time particle size distribution and concentration with a fast response time.
 
Particle size range 7 nm - 10 µm, flow rate 10 or 30 lpm.

Where to buy Dekati instruments

Dekati ELPI™ Electrial Low Pressure Impactor


The Dekati ELPI™ Electrical Low Pressure Impactor enables real time particle size distribution concentration measurement in the size range 7 nm up to 10 µm. The ELPI is intended for any application where a wide size range coverage and fast time response are required. Such applications include combustion aerosol studies, diesel PM emission measurements, indoor and outdoor air quality monitoring, pharmaceutical measurements and general aerosol research. Since ELPI is a collecting device, subsequent chemical or gravimetric analysis of the collected, size classified particles is possible.

The Dekati ELPI™ Electrical Low Pressure Impactor unit is controlled with user-friendly ELPIVI measurement software which enables monitoring of total concentration and particle size distribution in several different modes. These modes include parallel real time size distribution and total concentration monitoring even from several units at the same time.




Finding the right ELPI  for your application

The Dekati ELPI™ technology has also been modified for use in specifc applications:


AUTOMOTIVE



COMBUSTION



AMBIENT



PHARMACEUTICAL


Dekati ELPI™ Specifications


Particle size range:   0.007 – 10 μm with filter stage / 0.030 – 10 μm standard
Number of size classes: 12
Sample flow rate: 10 or 30 l/min
Impactor dimensions: Ø 65 x 300 mm
ELPI dimensions: H 570 x W 400 x D 230 mm
Collection plate diameter: 25 mm
Unit weight: 35 kg
Lowest stage pressure: 100 mbar
Pump requirements: 7 m3/h at 100 mbar (10 lpm) / 21 m3/h at 100 mbar (30 lpm)
Operating temperature: 5 – 40 ºC
Operating humidity: 0- 90 % RH Non-condensing
Response time: < 5 sec
Computer requirements: Pentium III 500 MHz, 512 MB RAM, MS-Windows NT™ 2000™, XP™ or Vista™
 
 
The ELPI Electrical Low Pressure Impactor includes:

  • ELPI unit with carrying case
  • extra set of impactor collection plates (IA-200),
  • extra charger
  • needle (IPR-114)
  • powercord
  • RS-232 data cord (IPR-509)
  • USB - RS-232 adapter (ELA-443)
  • impactor tweezers
  • blind NW16 flange for impactor leakage check
  • sample hose (tube, 2m, IPR-212)
  • NW16 - 3/8" connector (IPR-110)
  • tube connection for ELPI inlet
  • ELPIVI measurement software
  • ELPIxls data processing spread sheet
  • ELPI manuals, calibration data sheets


Contact Biral for more information

To find out more about this instrument or to discuss your application requirements please do not hesitate to contact Biral.


  • wwwparticle@biral.com (or click the Make Request button below the product photograph)
  • telephone to 01275 847787 (from the UK) or +44 1275 847787 (International).


After Sales Support

Biral offers free advice and technical support for the lifetime of the instruments we sell. Once you have purchased the unit you can contact us for help:



DEED (Dekati Engine Exhaust Diluter) DEED-100 A simple, easy to use engine exhaust condtioning system that guarantees precise repeatable results every time.
From £27513.00
 
DILUTER DI-1000 A simple constant dilution ratio diluter.
£6171.00
 
FINE PARTICLE SAMPLER FPS-4000 The most comprehensive dilution and sample conditioning system commercially available in the world.
From £27693.00
 
 
OUTDOOR ELPI - Electrical Low Pressure Impactor OELPI-01 Measures real-time particle size distribution and concentration with a fast response time.
From £72,593.00
 
DEKATI MASS MONITOR DMM-230a Real-time instrument for diesel and gasoline vehicle PM (Particulate Matter) emission measurements.
From £48,889.00
 
LOW PRESSURE IMPACTOR 10L/MIN LPI-10 The DLPI Low Pressure Impactor is a 13-stage stainless steel impactor.
From £10,476.00