Search By Application
 
Aerosol Dilution
FINE PARTICLE SAMPLER
The most comprehensive dilution and sample conditioning system commercially available in the world.

The two stage dilution system features unmatched versatility with applications reaching from automotive pre- and post after treatment measurements to nucleation studies.
Model: FPS-4000
Price: £POA
 
Aerosol Dilution
DEED (Dekati Engine Exhaust Diluter)
A simple, easy to use engine exhaust condtioning system that guarantees precise repeatable results every time.

Fulfils all requirements and recommendations of the upcoming exhaust fine particle measurement legislation (PMP).
Model: DEED-100
Price: £POA
 
Aerosol Dilution
DEKATI AXIAL DILUTER DAD-100
An economical and simple dilution unit where a reduction in particle concentration is needed.

The all-stainless steel design means it can be heated up to 500°C.
Model: DAD-100
Price: £POA
 
Aerosol Dilution
DEKATI DILUTER
A simple constant dilution ratio diluter.

The simplicity and robustness of the all stainless-steel design have made it a widely renowned choice for dilution of combustion aerosols.
Model: DI-1000
Price: £POA
 
Aerosol Conditioning
Planar NANO-DMA
Nanoparticle classifier in the size range 3 to 100 nm

Differential Mobility Analyser with high resolution and flow rate
Model: ND-1010
Price: £POA
 
Aerosol Conditioning
THERMODENUDER FOR REMOVAL OF VOLATILES 110V
The ELA-111 Dekati Thermodenuder is an easy-to-use and simple tool for removing volatile and semi-volatile compounds from automotive exhaust.

The high flow rate of the instrument makes it an ideal tool for use with ELPI™ (Electrical Low Pressure Impactor) and DMM (Dekati® Mass Monitor).
Model: ELA-111
Price: £POA
 
Aerosol Conditioning
DEKATI PARTICLE DRYER DD-601
Particle dryer designed to remove water in real-time from the aerosol sample in air quality measurements.

Specially designed to minimize particle losses and maximize drying efficiency.
Model: DD-601
Price: £POA
 
Aerosol Conditioning
SAC-65 SAMPLING CYCLONE
For separating large particles (greater than 10 µm) according to EPA 201A.

Suitable for combustion aerosol measurements and isokinetic sampling.
Model: SAC-65
Price: £POA
 
Aerosol Conditioning
ELECTRO SPRAY CHARGER
Device for the generation of ions and charged nanoparticles from a liquid phase sample.

Non-radioactive source.
Model: ES-3020
Price: £POA
 
Aerosol Conditioning
CORONA CHARGER
For charging aerosols and particles, ozone generation based on corona effect.

General purpose aerosol charger. Non-radioactive source.
Model: CC-8020
Price: £POA
 
Aerosol Conditioning
TRADITIONAL ELECTROMETER
All-purpose electrometer that measures the electron current.

Operates in the range of 1-10,000 fA.
Model: EL-5010
Price: £POA
 
Aerosol Conditioning
COMPACT ELECTROMETER
Compact, portable, battery-powered electrometer for ultra-low current (fA) at high voltages (10 kV).

Options include BIAS to increase stability and a control console for standalone use.
Model: EL-5020
Price: £POA
 
Aerosol Conditioning
AEROSOL ELECTROMETER
Designed to measure the electron current on charged aerosols

Transfers the electron's current to a measuring cable
Model: EL-5030
Price: £POA
 
Aerosol Conditioning
HIGH VOLTAGE SOURCE
Bipolar high voltage source

Voltage output 0 to +/- 10 kV
Model: HV-7010
Price: £POA
 
Aerosol Conditioning
HIGH VOLTAGE SOURCE
Bipolar high voltage source

Voltage output 0 to +/- 20 kV
Model: HV-7020
Price: £POA
 
Aerosol Conditioning
HIGH VOLTAGE SOURCE
Freq range 50kHz-1MHz Amplitude up to 300Vpp Auxiliar DC output up to 50V

Delivers a pure sinusoidal voltage
Model: HV-7030
Price: £POA
 
Aerosol Conditioning
PROGRAMMABLE PUMP FLOW CONTROLLER
Programmable aerosol flow control with integrated pump and HEPA filter. Resolution 01.lpm.

Maximum flow rate 50 lpm.
Model: PFC-6020
Price: £POA
 


Showing items 1 to 17 of a total of 17