Search By Application
 
COMPACT WIND SPEED & DIRECTION SYSTEM (analogue output)
Model: COMPACT SYSTEM 1
Price: £1,126.00
Delivery: 4 - 6 WEEKS ARO

COMPACT WIND SPEED & DIRECTION SYSTEM (analogue output)

A Compact mechanical cup and vane (wind speed and direction) system complete with traverse and power supply.
 
Choice of analogue outputs: either 0-20mA, 4-20mA, 0-10v, 0-2v or 0-5v.

Where to buy Thies Clima instruments

The Compact WIND SPEED and DIRECTION system     


This mechanical wind speed and direction system comprises:

  • Compact wind SPEED sensor (model 4.3519.00.XXX)
  • Compact wind DIRECTION vane (model 4.3129.00.XXX)

These Compact sensors are of a professional quality suitable for industrial use and have a wind speed measuring range of 0. 5 - 50 m/s (1 - 111 mph) and wind direction range of 0 - 360 degrees.

You can choose from any one of the following analogue outputs: 0-20mA, 4-20mA, 0-10V, 0-2V, 0-5V (the output must be specified at time of order).

Please see details and specifications below:


The system also includes:


  • an aluminium traverse for mounting the sensors together on a mast
  • a 230V power supply  - please contact us for other voltages



see photo of
traverse with
sensors
top right
The traverse (model 4.3171.30.00)
  • Clamping range:  48 mm to 102 mm diameter
  • Sensor distance: 0.8 m
  • Traverse: aluminium
  • Mounting set: stainless steel
  • Weight: 0.3 kg



Power supply unit
The power supply (model 9.3388.00.000)
  • The inputs and outpus are each protected by fuses
  • The housing is made of plastic
  • Primary voltage: 230 V / 50 Hz / 0.48 A
  • Secondary voltage: 26 V AC / 3.46 A  :  24 V AC / 0.5 A   :  12 VDC / 0.3 A
  • Protection rating:  IP65
  • Dimensions: 125 mm x 150 mm x 125 mm
  • Weight: 2.5 kg



About the Compact Wind Speed Sensor (model 4.3519.00.XXX)


The Compact wind speed anemometer is a mechanical cup instrument designed for the measurement of the horizontal component of the wind speed with analogue output signals. It is designed for building control technology systems, industrial power plants, wind power plants and the environmental protection sector – everywhere where precise weather data must be determined and converted for control technology purposes.

Selected and tested materials ensure the operation even under extreme conditions. The housings are made of seawater-resistant anodized aluminum. Cupstar is made of glass fiber reinforced special plastic and thus extremely durable and resistant.

There are 5 models with different analogue outputs which can be transmitted to recording instruments, data loggers, process control systems and displays.The different electrical outputs are universally compatible with other systems. Please refer to the wind speed indicators and alarms listed under accessories below.

For winter operation the instrument is equipped with electronically regulated heating which guarantees smooth running of the ball bearings and prevents the moving parts from icing-up.


CHOICE OF MODELS

There are a choice of 5 models depending on the type of electrical output required:
(when ordering on-line please specify output required in the notes)

 

    Model
    Output
    Load
4.3519.00.140 0 - 20 mA 500 Ohms max
4.3519.00.141 4 - 20 mA 500 Ohms max
4.3519.00.161 0 - 10 V 1 kOhms min
4.3519.00.167 0 - 2 V 1 kOhms min
4.3519.00.173 0 - 5 V 1 kOhms min

 

 

FEATURES

  • broad wind speed measurement range
  • good accuracy and repeatability
  • quick response
  • mixed composite / aluminium construction for durability
  • available in heated and unheated versions

 

 

What it does


The Compact series wind speed sensor has 3 rotating cups that move around a high quality bearing system providing a set amount of rotations for each wind speed. The amount of rotations and therefore the wind speed values are converted to proportional analogue signal outputs and this allows this sensor to be integrated into the widest variety of stations and logging systems.

 

 

SPECIFICATIONS for Compact wind speed sensor

model 4.3519.00.xxx
Wind speed range 0. 5 - 50 m/s (1 - 111 mph)
Accuracy % of measuring value +/- 3%
Resolution < 0.1 m/s
Operating voltage: 9- 30 VDC or 24 VAC/DC
(for 0 - 10 V output 13 - 30 VDC)
Current supply approx. 10 mA unloaded
Heating maximum 20 W; 24 VAC / DC
Ambient temperature -30 - + 70ºC
Cable - 12 m included LiYCY 6 x 0.25 mm2
IP rating  
Size Ø 135 x 165 mm
Weight 0.75 Kgs
Materials of cup star carbon-fibre-reinforced plastic
Materials of housing anodised aluminium and plastic
The instrument has a threaded pin PG21 with two nuts for mounting

 
Specifications may change without prior notice. E&OE



About the Compact wind direction sensor (model 4.3129.00.XXX)


The Compact wind direction sensor is a sensitive, heated, mechanical wind vane designed for the measurement of the horizontal wind direction with analogue output signals. It is designed for building control technology systems, industry, wind power systems, wind warning systems and the environmental protection sector.

The analogue outputs can be transmitted to recording instruments, data loggers, process control systems and displays. Please refer to the wind speed and direction indicator under accessories below.

For winter operation the instrument is equipped with electronically regulated heating which guarantees smooth running of the ball bearings and prevents the shaft and slot from icing-up


CHOICE OF MODELS

There are a choice of 5 models depending on the type of electrical output required
(When ordering on-line please specify the output required in the notes field)

Model
 Output Load
4.3129.00.140 0 - 20 mA 500 Ohms max
4.3129.00.141   4 - 20 mA 500 Ohms max
4.3129.00.161 0 - 10 V 1 kOhms min
4.3129.00.167      0 - 2 V 1 kOhms min
4.3129.00.173 0 - 5 V 1 kOhms min



SPECIFICATIONS for Compact wind direction sensor model 4.3129.00.xxx
Wind direction measuring range 0 - 360
Accuracy +/-.5º
Resolution 11.25º
Operating voltage: 9- 30 VDC or 24 VAC/DC
(for 0 - 10 V output 13 - 30 VDC)
Current supply approx. 10 mA unloaded
Heating maximum 20 W; 24 VAC / DC
Ambient temperature -30 - + 70ºC
Cable - 12 m included LiYCY 6 x 0.25 mm2
IP rating  
Size 50 mm x 220 mm
Weight 1.1 Kgs
Materials of wind vane plastic
Materials of housing anodised aluminium and plastic
The instrument has a threaded pin PG21 with two nuts for mounting
 
Specifications may change without prior notice. E&OE


To contact Biral


For advice
  • wwwmet@biral.com or click the Make Request button below the product photograph
  • telephone 01275 847787 (from the UK) or +44 1275 847787 (International)


For after sales support

Biral offers free advice and technical support for the lifetime of the instruments we sell.
 
WIND SPEED SENSOR COMPACT 4.3519.00.XXX Designed for industrial use; accuracy +/- 3%. The cup star is plastic and the housing is anodised aluminium and plastic.
£373.00
 
WIND DIRECTION SENSOR COMPACT 4.3129.00.XXX Designed for industrial use; accuracy +/- 5 deg. The wind vane is plastic and the housing is anodised aluminium and plastic.
£455.00