| + UK Met Index | First Class Wind Speed and Direction
System
|
Links to previous pages Wind Section
Tel UK: 01275 847787 Fax UK: 01275 847303
_______________
Links to previous pages Wind Section
Links to previous pages Wind Section
Links to previous pages Wind Section
|
First Class wind speed and direction system includes: This First Class wind speed and direction system is designed for the measurement of the horizontal component of the wind speed for meteorological applications, site evaluation and the measurement of capacity characteristics of wind power systems. The system includes high specification mechanical cup and vane anemometers which can be mounted on an appropriate traverse / bracket for use on masts and weather stations etc. The system has defined and optimised, dynamic behaviour even in high turbulence intensities as well as minimal over-speeding and a low starting speed. The data is output as digital signals and can be recorded using a PC or Thies data logger. If you are interested in a display please see refer to the digital wind speed and wind direction displays listed under accessories below. For winter operation the instrument is equipped with electronically regulated heating which guarantees smooth running of the ball bearings and prevents the moving parts from icing-up
Heated System
The First Class wind speed and direction system has a sensitive wind direction vane and 3 rotating cups that move around a high quality bearing system providing a set amount of rotations for each wind speed. The amount of rotations are directly proportional to wind speed and this allows this sensor to be integrated into a wide variety of stations or logging systems. Examples of data output The wind speed data is output in the form of a rectangular Hz signal (example 1000 Hz at 112 mph). The wind direction data is output as a digital signal with values between 0-360º.
Specifications for First Class Wind SPEED Sensors model 4.3350.10.000 unheated and 4.3350.00.000 heated
This range is in continuous development
therefore
Specifications for First Class Wind DIRECTION Sensors model 4.3150.10.000 unheated and 4.3150.00.000 heated
This range is in continuous development therefore
1. Digital wind speed and direction display model 4.3250.xx.000 Using a RS422 interface to connect to the wind speed and direction sensors the displays indicate the wind direction in a circle of 72 LED luminous bars and the speed by 7 segment LEDs. a) The model 4.3250.xx.000 provides
2. Digital wind speed and direction display models 4.3251.xx.000 This model is designed for use on ships. It is similar to the 4.3250.xx.000 above except that it has a direction circle divided in red and green LEDs according to port side and starboard. b) The model 4.3251.xx.000 provides
Specifications for both Digital Wind Speed Displays
specifications may change without prior notice. E&OE These unit are usually
dispatched within 4 - 6 weeks ARO After Sales Support Biral offers free advice and technical support for the lifetime of the instruments we sell. Once you have purchased the unit you can contact us for help on wwwmetsupport@biral.com |
Search
web site
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Links to previous pages Wind Section Tel UK: 01275 847787 Fax UK: 01275 847303 Email: wwwmet@biral.com |
Not sure if this is the right sensor for you and would like help selecting a sensor? Please email your requirements to: wwwmet@biral.com This range is in continuous development therefore specifications may change without prior notice. E&OE Thank you for visiting www.biral.com/met/wind/firstcombi.htm |
