CUSTOMISED TO SUIT YOUR REQUIREMENTS - one of the advantages of the
3-axis Wind Professional and Wind Research ultrasonic
anemometers.
These sensors can be customised to suit your requirements which means that you can have
an anemometer built for your application without paying for features
which you do not need.
Biral provides several models of ultrasonic anemometers that are specifically
configured to suit the majority of application needs and budgets. However we understand
that there will always be a need to have a custom designed unit and therefore we offer the
ability to build a system based on one of two basic building blocks:
- a 30 Hz maximum output ultrasonic anemometer
(as used in the Wind Professional range)
- a 50 Hz maximum output ultrasonic anemometer
(as used in the Wind Research range)
Nearly all options and accessories can be added to one of these two systems, now or in
the future as budget and requirements dictate. The only item that cannot be added at a later
date, beyond the basic speed, is the option of heating as this is incorporated in the
welded head design.
This is the only range of ultrasonic anemometers
which can be customised in this way.
30 Hz customised sensor
Below are the options and accessories available for a 30 Hz sensor:
Options:
Outer bar head design
Head heating
Analogue 0-10 V output channel
Extended wind speed range
Mains powered |
Accessories:
Transportation box
Field Calibration Kit |
To see the specifications of this 30 Hz sensor please
visit either of the following:
Wind Professional 100 (without heating)
Wind Professional 200 (with heating)
These are the standard configurations of the 30 Hz sensor.
50 Hz customised sensor
Below are the options and accessories for a 50 Hz sensor:
Options:
Outer bar head design
Head heating
Extra strong head heating
Analogue 0-10 V output channel
Analogue 4- 20 mA output channel
Online turbulence parameters
Separation of sensor head and electrics
Analogue data input 2tti 2 pt 100
Improved resolution
Extension board
Extended wind speed range
Mains powered |
Accessories:
Transportation box
Field Calibration Kit |
To see the specifications of this 50 Hz sensor please
visit any of the following:
Wind Research 100 (entry level)
Wind Research 200 (with heating)
Wind Research 300 (separated head and electronics)
Wind Research 400 (analogue inputs, turbulence calculations ....)
These are the standard configurations of the 50 Hz sensor.
If you would like to discuss a custom build please do not
hesitate to contact us. Email mailto:wwwmet@biral.com
The advantages
..... data quality checks
..... time and date stamped
..... field calibration kit
..... protected transducers
..... heating technology
..... robustness
.... sonic
temperature
Back
to previous page
www.biral.com/met/wind/customised.htm |
