Link to the Home Page

USA Canada
USA-2 Wind Horizon 300 2-axis ultrasonic wind sensor
with digital and analog output

Links to previous pages
+ USA / Canada met index
      

Wind Section
  + wind FIND
     + wind type
        + wind ultrasonic
           + wind 2-axis
              -
YOU ARE HERE
             

FIND
by application


_______________

Send an e-mail to us  

_______________

The USA-2 Wind Horizon 300 provides excellent cost / performance ratio for the reliable measurement of wind speed and direction.

With no moving parts and rugged stainless steel construction the USA-2 Wind Horizon 300 is suitable for use in a wide range of applications with both digital and analog output formats.

The USA-2 Wind Horizon 300 is flexible and can be connected to two different devices at the same time with excellent resolution and easy interfacing. For example one data output can be viewed instantaneously on a laptop or display and the other logged to a logger or SCADA system.

The USA-2 Wind Horizon 300 has high reliability due to the superior design, the ultrasonic measurement technology and data quality monitoring function providing excellent repeatability of data and error accuracy, which means you can concentrate on the data and not the sensor. Additional data such as virtual temperature is also available if desired.

   

CONTENTS ON THIS PAGE

OTHER LINKS

 

USA Wind Horizon 2-axis ultrasonic sensor

 


Features

  • no moving parts
  • maintenance free
  • up to 20 Hz sampling rate
  • digital and analog outputs
  • wind speed range: 0 - 134 mph
  • wind direction range: 0 - 359o or 0 - 540o
  • high resolution and accuracy
  • low DC power requirements
  • virtual temperature output
  • field calibration kit (option)

Top of page


What it does

The USA-2 Wind Horizon 300 provides the following information in various data outputs which can be polled or output automatically:

  • instantaneous and averaged data for the horizontal wind vectors
  • horizontal wind speed and direction
  • chart mode (provides 0-540º wind direction and speed values)
  • NMEA value outputs

Data can be averaged by several methods:

  • scalar or vectoral
  • clock synchronized or running average
  • separate output rates and sampling times

Some other important features:

  • user definable north orientation (range 0-359º alignment off axis)
  • data quality control to perform confidence checks on raw data
  • date / time stamps with several options
  • check sum information
  • calibration validity output monitoring

Top of page


Examples of data output

Normal data example (instantaneous). Every data string starts with a header line that consists of the string SNC followed by a space and 12 characters for the date/time stamp, another space and finally the UTC string ie:

SNC 940815090015 UTC

x = 1.83     y = -0.79    z = 0.20       T = 20.17     

 

SNC 940815090015 UTC    AVE  600      SMP  10    AZI  0      SDQ 100  

_____________________________________________________________________

where

AVE the averaging time
SMP the sampling rate in Hertz
AZI the devize azimuth
SDQ the sonic data quality
x mean x wind component in the sensor related orthogonal coordinate system (parallel to the black arrow on the electronic box); unit m/s
y mean y wind component in the sensor related orthogonal coordinate system (horizontally perpendicular to x); unit m/s
T mean temperature; unit ºC
vel mean horizontal wind velocity; units m/s
dir mean horizontal wind direction (depends on setting of parameter AZ); unit°

Top of page


Specifications USA Wind Horizon 300 anemometer

Wind Speed  
Range 0 - 134 mph
Accuracy +/- 3 % (full scale output)
Resolution 0.01 m/s (steps)
Wind Direction   
Range 0 - 359o or 0- 540o
Accuracy +/- 3o
Resolution 1o (steps)
Digital Output   
Type RS232 OR RS422 OR RS485
Sampling rate 20 Hz (selectable)
Averaging up to 3600 seconds
Analog Output   
Type 0-10 V, 0-2- mA
Resolution 12 bit
Scalable Yes
Power   
Requirements 24 VDC
Current draw 125 mA (@ 24 VDC)
Data   
Sonic temperature -40oF to 140oF (-40oC to 60oC)
in non-condensing environments
Units of measure m/s, knots, mph, km/h, oC
General   
IP rating 67
Size 11 x 21 inches
Weight 7.4 Ibs
Materials:   
           sensor head stainless steel (V4A)
           electronic housing powder-coated die-cast aluminum

This range is in continuous development therefore
specifications may change without prior notice. E&OE

Accessories
I
ncluded with USA-2 Wind Horizon 300:

39 ft power and data cable
analog output

Optional accessories:
Field calibration kit

Top of page


Delivery

This unit is usually dispatched within 4 - 6 weeks ARO (After Receipt of Order)


After Sales Support

Biral offers free advice and technical support by email, telephone and fax for the lifetime of the instruments we sell. Once you have purchased the unit you can contact us for help on wwwusametsuppport@biral.com.


Search web site

Links to previous pages
+ USA / Canada met index
      

Wind Section
  + wind FIND
     + wind type
        + wind ultrasonic
           + wind 2-axis
              -
YOU ARE HERE
             

FIND
by application

Not sure if this is the right sensor for you and would like help selecting a sensor?

If you have not decided which sensor you would like or you would like to have a customized sensor incorporating features from more then one model please email.wwwusamet@biral.com

or if you would prefer try the following pages:

   find sensors by application type

 

This range is in continuous development therefore specifications may change without prior notice. E&OE

Thank you for visiting www.biral.com/meteorology/usa/wind/wh300.htm

Top of page