CONTACT DETAILS

Tel UK:  01275 847787
Tel Intl: + 44 1275 847787

Fax UK: 01275 847303
Fax Intl: + 44 1275 847303

Email Biral
 

CONTACT DETAILS

Tel UK:  01275 847787
Tel Intl: + 44 1275 847787

Fax UK: 01275 847303
Fax Intl: + 44 1275 847303

Email Biral
 

Industrial grade weather station measuring wind speed, wind direction, temperature, humidity and pressure. Mains powered with battery back up as standard, however the system has very low power requirements so it can run on battery only or solar cells with battery.

Includes:

• DATA LOGGER
    
• MECHANICAL WIND SPEED AND DIRECTION SENSOR
  (PROPELLER AND VANE TYPE)
   
• HUMIDITY AND TEMPERATURE SENSOR
   
• BAROMETRIC PRESSURE SENSOR
   
• 3m TOWER, GUY WIRE KIT AND LIGHTNING ROD

SPECIFICATIONS

of the Industrial Weather Station

• 32-bit micro-controller, Motorola 68332, 16MHz, Full floating point arithmetic, 16Kb data storage memory
• Includes USI (Universal Serial Interface)
• Includes internal temperature
• Includes self-diagnostics and output
• Broadcasts data string or can be polled (data string is comma delimited ASCII – but other formats are available as standard)
• For expansion - 16 single-ended analogue inputs (7 differential) 18 bit resolution, software selectable, 15 digital input/output channels, 5 switched excitation outputs of, 5 switched power outputs, 12 VDC and 5 VDC
• hardware watchdog timer and power monitor
• Real-time clock (+/- 5 sec /month)
• EMI, ESD protection – Equal to the best in the industry
• ZENO-3200 Full Serial I/O ports; Up to 5 selectable ports are software selectable for RS-232, RS-485, SDI-12 (supports full functioning on multi-drop for both RS-485 and SDI-12). Selectable baud rates from 300 to 19,200. USI on all ports;
• ZENOSOFT - Operating system firmware for ZENO®-3200. Contains menus and parameter set-ups for sensors, processes, communications and data outputs (firmware is embedded in the ZENO®)

SENSORS

• WIND SPEED and DIRECTION - RMY 5103 propeller and vane combined anemometer with mounting hardware.  Combines high accuracy with durability.

  Wind Speed Propeller

  Range:	0 to 60 m/s (117 Kts) (134 mph)
  Survival:	100 m/s (194 Kts) (224 mph)
  Threshold:	1.0 m/s (2.0 Kts) (2.2 mph)
  	0.5 m/s (1.0 Kts) (1.1 mph) - with special bearings
  Distance Constant:	2.7 m (8.9 ft) (63% recovery)
  Signal Output:	sine wave—90 Hz / 8.8 m/s
  Resolution:	0.1 m/s (0.2 Kts) (0.2 mph)
  Accuracy:	+/- 0.3 m/s (0.6 Kts) (0.7 mph)

  
  Wind Direction Vane

  Range:	360° mechanical, 355° electrical
  Resolution:	1°
  Accuracy:	+/- 3° (2° optional)
  Survival:	100 m/s (194 Kts) (224 mph)
  Threshold:	1.1 m/s (2.1 Kts) (2.4 mph)
  	0.6 m/s (1.2 Kts) (1.3 mph) - with special bearings
  Delay Distance:	1.3 m (4.3 ft) (50% recovery)

   

• RELATIVE HUMIDITY AND TEMPERATURE – Sensor includes solar radiation screen and mounting bracket/hardware

          Measurement range: 0-100% RH, -30 to +70^oC
          Accuracy: +/-3 %(RH), 0.1 ^oC (temp)
          Resolution: 0.01 °C

• PRESSURE – Barometric pressure sensor

          Accuracy: +/- 0.1 at 22^oC
          Operating temperature: -30 to +65^oC

3m TOWER, GUY WIRE KIT AND LIGHTNING ROD

• Quick set-up tripod tower. This tower as a stand-alone can survive 60 mph gusts and with the feet sand bagged much higher speeds. Each piece (there are 3 legs, a lower section and top section) is constructed of 6061 t-6 aluminium. Once erected the tower is strong enough to stand on as all joints are of a welded connection.
• Lightning rod and necessary grounding and attachment hardware for 3 meter tower
• Mounting Arm, solar radiation sensor on tripod
• Mounting arm for wind sensor

POWER ADAPTER

• AC power converter for 220 VAC to 12 VDC