Link to the Home Page

+ UK Met Index

Clima Sensor 2000

Measures wind speed, precipitation, brightness, temperature and air humidity

Links to previous pages

Weather Station Section
      + Weather Stations  
 

Back to previous page


_______________

 

Tel UK:  01275 847787
Tel Intl: + 44 1275 847787

Fax UK:  01275 847303
Fax Intl: + 44 1275 84730

 Send an e-mail to us  

_______________

 There are 4 models in the Clima 2000 measuring some or all of the following parameters depending on the requirement:
  • wind speed
  • precipitation
  • brightness
  • temperature
  • air humidity

Wind - a rotating 3 cup wind speed design, measurements are made by a relation to the number of revolutions which is linear-proportional to the wind speed. This is supplied as a frequency through a Reed-contact to a connected frequency-voltage-converter. The frequency is dependent on the revolution number.

Precipitation - precipitation is detected by means of an infrared short measurement path that looks for breaks in the beam and can derive precipitation information from the time and duration of the break. 

Brightness - the brightness is detected by means of three independent photo-diodes which are arranged in 90° segments. Three independent output voltages are linear to the brightness.

Temperature - the temperature sensor is a standardised resistance thermometer Pt 100 which has a long-term stability. The temperature is of a reference quality and standard output.

Air humidity - the measurement is carried out with a capacitive element which changes capacity according to the relative humidity.

 

CONTENTS ON THIS PAGE

 

OTHER LINKS

 Clima 2000 sensor model 4.9010

 

 

 

Comparison of the four models available

  4.9010 4.9000

4.9011

4.9001
Wind speed * *

  

 

Precipitation * *

*

*
Brightness * * * *
Temperature *   *  
Air Humidity   *      *   


Features

  • extremely cost effective multi-parameter weather station
  • compact, durable construction
  • individual parameters are measured with a high degree of accuracy
  • ideally suited for monitoring environmental controls in buildings and structures

 

Top of page

What it does

Measures multiple parameters with the following general specifications:

  • wind speed with range of 1 - 40 m/s (89 mph)
  • precipitation beginning and end
  • light intensity 0-100 k Lux
  • temperature range -20ºC to +60ºC (-4 ºF to 140 ºF)
  • relative humidity 0-100%

Top of page

Examples of data output

The data is output as a standard analogue signal which can be output to commercially available bus systems and is output in the form of 0-10 V signals for each individual parameter.

example - 100% relative humidity = 10 V,    0% relative humidity = 0 V

Top of page

 

Specifications for Clima Sensor 2000

Wind   
Measuring range 1 - 40 m/s (2.24 - 89.8 mph)
Accuracy +/- 0.5 m/s res +/- 5% of mr
Electrical output 0-10 V (=0 - 40 m/s)
Load > 10 Ohms
     
Precipitation   
Measuring range rain yes / no
Electrical output 0 V for rain, 10 V with dryness
Sensitivity fine drizzle
Load > 100 kW
Switch-on-delay approx 3 rain particles
Switch-off-delay approx 2 minutes
    
Brightness     
Measuring range 0 - 100 k Lux
Spectral range 700 - 1050 mm
Accuracy +/- 10 of measuring value
Electrical output 3 x 0 - 10 V, eastern, southern and western direction
Load > 10 Ohms
     
Temperature   
Measuring range -20ºC to +60ºC
Measuring element Pt100 acc to IEC 751 1/3 DIN class B
Accuracy +/- 0.15 ºC at 0 ºC1
Electrical output 0 - 10 V
Load > 10 Ohms
     
Air Humidity   
Measuring range 0 - 100% rel humidity
Accuracy +/- 3% in the range
Electrical output 0-10 V
Load > 10 Ohms
    
General   
Operating voltage: 24 VAC +/-15% ; 24 VDC +/-25%
              for 0 - 10 V output 13 - 30 VDC
Current consumption < 100 mA
Ambient temperature -40ºC to + 60ºC
Cable - 10 m included LiYCY 12 x 0.14 mm2, uv-resistant, max 100 m at a supply with nominal 24 V
Mounting retaining clamp, stainless steel for mast or wall
Weight max 1.5 Kgs

 

This range is in continuous development therefore
specifications may change without prior notice

Delivery

Delivery for this unit is usually 2 - 4 weeks ARO (After Receipt of Order)

After Sales Support

Biral offers free advice and technical support for the lifetime of the instruments we sell. Once you have purchased the unit you can contact us for help on wwwmetsuppport@biral.com  

Search web site

 

 
 

Links to previous pages
+ UK Met Index

Weather Station Section
      + Weather Stations  
 

Back to previous page
 

Links to previous pages
+ UK Met Index

Weather Station Section
      + Weather Stations  
 

Back to previous page

Links to previous pages
+ UK Met Index

Weather Station Section
      + Weather Stations  
 

Back to previous page

Tel UK:  01275 847787
Tel Intl: + 44 1275 847787

Fax UK:  01275 847303
Fax Intl: + 44 1275 84730

 Send an e-mail to us  

Not sure if this is the right sensor for you and would like help selecting a sensor? email us: wwwmet@biral.com

Thank you for visiting www.biral.com/met/stations/clima.htm

Top of page